Ludong teaches you how to routinely maintain and maintain a stable soil mixing station

The driving gear of mixer in stabilized soil mixing station should be coated with butter before starting every day. Should the electrical terminals of all electrical appliances such as arms, relays and so on, be able to loose or slack, can the wiring be disabled? All kinds of materials should be suitable for "stabilizing the practical raw material limitations of plant mixing equipment".

The working conditions of the agitator are elegant. When the pulp is worn to 2 / 3 of the original area, the pulp should be replaced. The axis of the roll is not perpendicular to the outer line of the belt. In order to shrink the loading cycle of the loader. The chain wheel covers of each part shall not be removed for collision, so as to avoid accidents. Loader hand should be controlled to prevent mixing. In the course of operation, the belt conveyor should strive to make the belt running properly so as to make the belt wear evenly. When the equipment is running for a period of time, it should be cleaned up in time. It is necessary to clear all the materials on the mixer, the belt conveyor and the loading belt conveyor before it can start again. Because all kinds of materials have not been transported, they will give the general anesthesia much more. The fences in the batching machine are used to remove excess material. It is possible to wait for the vehicle to be opened and closed.

The maintenance of the stabilized soil mixing station must press the "emergency stop" button under the mercerizing of all downtime. In the production and production sample, it appears that the accident will happen in the track, and it will be used for outdoor staff. Shut down the pump Mechatronics to stop the water supply. The stable soil dissimilation mixture prepared by the equipment is allocated to the moisture content. The equipment can be placed more sensitively according to the theoretical environment of the construction site. The disproportionation of the aggregate specifications will not only affect the detention of the aggregate gradation, but the Department should prevent the immersion of the rainwater so as to prevent the cement from softening and forming a building. Loaders can be equipped with several belt conveyors and cement tankers for transporting bulk powder. The two grouting holes should be left for the concrete piers to be provided for mixing and storing materials and materials. The opening of material door is used to control coarse flow of coarse aggregate. When the equipment is put into normal operation, it should be equipped with three scouring working Phoenix claws. According to the distance of the isolated distance and the paving material of the finished material, the yield of the equipment must be produced.